-
CS-screw 3.5×16 mm to mount DUO 30 (Torx head) 1 Pack includes 1,000 pcs -
The FAST biscuit is a #20 self-tightening, non-visible plastic snap-in connector and can be used in all wood materials. The two connector pieces are simply knocked into the biscuit cut with a hammer. The patented cutting edges hold the connector in the slot with no glue required. Simply snap-in the male into the female part to carry out the assembly. → Order a Sample Pack -
The tried and tested CHAMP biscuit is a #20 self-tightening, non-visible plastic slide-in connector and universally used for all types of materials for furniture, case goods, and architectural millwork. The two halves of the plastic connector are simply glued into the slot. Through the holes on the bottom part of the connector, the KNAPP Adhesive PU+ (Z011/1) can bond firmly to the material. After the curing, simply slide the parts together and tighten up the joint. → Order a Sample Pack -
The KNAPP®-Dowel is a strong and durable self-holding plastic dowel available in 6x28 mm, 8x36 mm and 8x50 mm. It grips itself into the borehole due to its special design of threaded ribs and lengthwise groove, hence, no clamping or glue is needed. → Order a Sample Pack -
The CHICO is a precision connector made of aluminum die-cast zinc, which can also be used in Corian®, Marlan®, and similar materials in addition to wood materials. The halves of the connector are screwed into a groove (50 x 12 x 10 mm) and joined sliding them together. While sliding them into each other, the joint tightens up and is immediately load-bearing. The integrated stop allows assembly and disconnection in one direction. → Order a Sample Pack. -
This Router Base Plate Adapter holds the Router Bushing 1" OD in combination with the 2 Flute Straight Router Bit 13/32" diameter and the MULTI F Routing Jigs to make the recess for DUO, ACRO, BASIS, RICON, and GIGANT connectors.
Link to: → Router Bushing 1" OD → 2 Flute Straight Router Bit Ø13/32" → MULTI F Routing Jig -
CS screw 6x40 mm (for DUO and ACRO) 1 packet includes 250 pcs SKU : Z501 -
The KNAPP®-Dowel is a strong and durable self-holding plastic dowel available in 6x28 mm and 8x36 mm. Get your Starter Kit today. KNAPP-Adhesive PU+ included! → Order larger quantity -
The UNO 30 connector set consists of a round 30 mm Ø stainless steel bracket with a V-shaped receiver socket that is installed with three 3x13 mm Pan Head Screws and a 5x50 mm CS-screw, including a washer as the counterpart. Easy and fast assembly is guaranteed, as the generously V-shaped receiver socket receives the CS-screw head when mounted. → Order a Sample Pack Need a Locking Clip to prevent upward movement? -
The CLIPS biscuit is a #20 two-piece snap-in plastic connector and can be glued in all wood materials. The ribbed pin is simply snapped into the fork. → Order a Sample Pack.
Call us today! (704) 499-4899
