-
The TUCK spring steel compression dowel is immediately load-bearing for attaching components without glue or clamps. TUCK is available in five sizes and processed like a conventional wooden dowel. The TUCK is self-tightening and no clamping aid is required when assembling the workpiece (cabinet, furniture, interior design, etc.). The spring steel design guarantees a permanent tightening. → Order a Sample Pack -
DUO-System is strategically engineered for fast processing while maintaining a design of traditional frame joint. Simple and easy-to-use. The most common applications are for Bed Rails, Stringers, and Table aprons. We recommend accessories → 2 Flute Straight Router Bit 13/32" to be combined with —> Router Bushing 1" OD and the MULTI F Routing Jigs to make make the mortise. Optionally, → Router Base Plate Adapter that holds the Router Bushing 1" OD.
→ Order a Sample Pack -
The UNO 30 connector set consists of a round 30 mm Ø stainless steel bracket with a V-shaped receiver socket that is installed with three 3x13 mm Pan Head Screws and a 5x50 mm CS-screw, including a washer as the counterpart. Easy and fast assembly is guaranteed, as the generously V-shaped receiver socket receives the CS-screw head when mounted. → Order a Sample Pack Need a Locking Clip to prevent upward movement? -
The ZIPBOLT™ FASTFIT is a one-piece joint connector for corner joints widely used for case goods and cabinetry → Order a Sample Pack. -
The CLIPS biscuit is a #20 two-piece snap-in plastic connector and can be glued in all wood materials. The ribbed pin is simply snapped into the fork. → Order a Sample Pack. -
The FAST biscuit is a #20 self-tightening, non-visible plastic snap-in connector and can be used in all wood materials. The two connector pieces are simply knocked into the biscuit cut with a hammer. The patented cutting edges hold the connector in the slot with no glue required. Simply snap-in the male into the female part to carry out the assembly. → Order a Sample Pack -
Our Custom KLICK Dovetail Router Bit makes the perfect groove for your sKLICK and KLICK connectors. Its simple design is conducive to fast assembly, as it allows you to insert the KLICK or sKLICK for a solid self-tightening connection. The softened edge the router bit makes will allow you to insert the KLICK or sKLICK multiple times without tearing the edge of your material. The tungsten carbide tipped blade ensures optimal protection for long-lasting performance. All of our KNAPP® router bits are made in Austria, as we proudly offer the highest quality products available. -
The METAL biscuit is a #20 self-tightening, non-visible zinc die-casting slide-in connector with integrated locking tabs and is suitable for load-bearing joints for panels and boards. The connector halves are inserted and screwed into the biscuit slot with pan-head screws. Simply slide the connector halves into each other to carry out the assembly. → Order a Sample Pack -
The tried and tested CHAMP biscuit is a #20 self-tightening, non-visible plastic slide-in connector and universally used for all types of materials for furniture, case goods, and architectural millwork. The two halves of the plastic connector are simply glued into the slot. Through the holes on the bottom part of the connector, the KNAPP Adhesive PU+ (Z011/1) can bond firmly to the material. After the curing, simply slide the parts together and tighten up the joint. → Order a Sample Pack -
The SILVER biscuit is a #20 self-tightening, non-visible, aluminum die-cast, slide-in connector with integrated locking tabs and can be used in all wood materials, especially for solid wood (hardwood). The two identical connector halves are simply knocked into the biscuit slot with a hammer. The patented cutting edges hold the connector in the groove with no glue required. Simply insert and then slide connector halves into each other to carry out the assembly. → Order a Sample Pack -
The SUNNY biscuit is a #20 self-tightening, non-visible plastic slide-in connector with integrated locking tabs and can be used in all wood materials. The two identical connector halves are simply knocked into the biscuit slot with a hammer. The patented cutting edges hold the connector in the groove with no glue required. Simply slide the connector halves into each other to carry out the assembly. → Order a Sample Pack
Call us today! (704) 499-4899
