The ZIPBOLT™ Sample Pack contains 3 pieces:
1 x ZIPBOLT™ 100 Mini
1 x ZIPBOLT™ 90 KD
1 x ZIPBOLT™ 85
The ZIPBOLT™️ connector is a practical and innovative solution as a countertop, worktop, and frame connector. The ZIPBOLT™️ completely eliminates the difficult and time-consuming use of a screwdriver needed for conventional connectors and fasteners. ZIPBOLT™️ requires no additional tightening while the parts are connected. Tensioning tools often cause damage and a considerable amount of extra work – this is not necessary when using the ZIPBOLT™️. The fastener connects and holds the components in position; easy disassembly is possible at any time.
The connector consists of a threaded rod, which has a metric fine thread and ensures an optimal force transmission – combined with a force-transmitting gear drive. The mounting of the connector is very fast; it is easy to install with a cordless drill or even a hand-held screwdriver. With these tools, the processor can quickly tighten the components together. One-hand mounting is also possible. Countertops and frames from 5/8″ (16 mm) to 1-1/2″ (38 mm) board thickness can be connected in just a few seconds.
The different variations ZIPBOLT™️ 85, 100 Mini, 120, 170 and 90 KD are specifically tailored for different dimensions and requirements in the components.
ZIPBOLT™️ 100 MINI – Components can be tightened by simply using a #4 mm or 5/32″ hex key.
ZIPBOLT™️ 85, 120, 170 – Components can be tightened simply by using a #5 mm or 3/16″ hex key.
Into pre-drilled holes and grooves
Fast and easily installed by only using a 5 mm Allen key or 5 mm hex bit in conjunction with a cordless drill
Drilling machine, plunge router, CNC equipment
Solid wood, wood panels, composite materials from 16 mm to 22 mm thickness up
Connector for worktops/countertops and panels
Beds and Countertops