ZIPBOLT™ – Countertop and Joint Connector

The ZIPBOLT™️ connector is a practical and innovative solution as a frame and worktop/countertop and home furniture connector. The ZIPBOLT™️ completely eliminates the difficult and time-consuming use of a screwdriver needed for conventional connectors. The mounting of the connector is very fast and easy to install with a cordless drill or even a hand screwdriver. Frames from 1/2″ (12,5 mm) to 1-1/2″ (38 mm) board thickness can be connected in just a few seconds.

→ Order a Sample Pack

Login to view price

The ZIPBOLT™️ connector is a practical and innovative solution as a countertop/worktop and frame connector. The ZIPBOLT™️ completely eliminates the difficult and time-consuming use of a screwdriver needed for conventional connectors and fasteners. ZIPBOLT™️ requires no additional tightening while the parts are connected. Tensioning tools often cause damage and a considerable amount of extra work – this is not necessary when using the ZIPBOLT™️. The fastener connects and holds the components in position; easy disassembly is possible at any time.

The connector consists of a threaded rod, which has a metric fine thread and ensures an optimal force transmission – combined with a force-transmitting gear drive. The mounting of the connector is very fast; it is easy to install with a cordless drill or even a hand-held screwdriver. With these tools, the processor can quickly tighten the components together. One-hand mounting is also possible. Countertops and frames from 5/8″ (16 mm) to 1-1/2″ (38 mm) board thickness can be connected in just a few seconds. The different variations ZIPBOLT™️ 85, 100 Mini, 120, 170 and 90 KD are specifically tailored for different dimensions and requirements in the components.

Features and Benefits:
  • Fast and simple assembly
    • Items can be flat packed, shipped, and assembled on site
    • Easy to install with a cordless drill or hand-held screwdriver
    • Reduces labor and equipment cost
  • Demountable
    • Can be disassembled and reassembled at any time
  • Versatile
    • For board thickness from 5/8″ (16 mm) to 1-1/2″ (38 mm)
    • Used with all wood and board materials
Tips:
  • Connector for RTA furniture.
Applications:
  • Countertops and frames
  • Case Goods
  • Beds frames
  • Tables and chairs
  • Case Goods
  • In office and home furniture
  • Staircases

ZIPBOLT™ Variants

Beds and Countertops

ZIPBOLT™️ 100 mini – Joint connector for countertop from 5/8″ (16 mm) with metal housing

The ZIPBOLT™️ 100 MINI is 5.5 mm high and should be drilled 13 mm deep with a 25 mm diameter drill. It can be used from a board thickness of 16 mm to 20 mm. The breaking loads of the metal housing are also 100 kg and the breaking load in pulling direction is as well up to 60 kg.

Drilling depth M
13 mm
Length
100 mm
X
5,5 mm
Ø A
25 mm
B
42-49 mm
C
42-49 mm
Ø F
6 mm
E
10 mm

ZIPBOLT™️ 85 – Joint connector for countertop from 7/8″ (22 mm) with metal housing

The ZIPBOLT™️ 85, 120 and 170 have been designed for use in countertops. The connector is 9.5 mm high and should be drilled 20 mm deep with a 35 mm diameter drilled hole. This makes it suitable for countertop thickness of 25 mm to 40 mm. The breaking load of the metal housing is about 100 kg and the breaking load in pulling direction is up to 60 kg.

Drilling depth M
20 mm
Length
85 mm
X
9,5 mm
Ø A
35 mm
B
33-44 mm
C
33-44 mm
Ø F
6 mm
E
8 mm

ZIPBOLT™️ 120 – Joint connector for countertop from 7/8″ (22 mm) with metal housing

The ZIPBOLT™️ 85, 120 and 170 have been designed for use in countertops. The connector is 9.5 mm high and should be drilled 20 mm deep with a 35 mm diameter drilled hole. This makes it suitable for countertop thickness of 25 mm to 40 mm. The breaking load of the metal housing is about 100 kg and the breaking load in pulling direction is up to 60 kg.

Drilling depth M
20 mm
Length
120 mm
X
9,5 mm
Ø A
35 mm
B
50-62 mm
C
50-62 mm
Ø F
6 mm
E
8 mm

ZIPBOLT™️ 170 – Joint connector for countertop from 7/8″ (22 mm) with metal housing

The ZIPBOLT™️ 85, 120 and 170 have been designed for use in countertops. The connector is 9.5 mm high and should be drilled 20 mm deep with a 35 mm diameter drilled hole. This makes it suitable for countertop thickness of 25 mm to 40 mm. The breaking load of the metal housing is about 100 kg and the breaking load in pulling direction is up to 60 kg.

Drilling depth M
20 mm
Length
170 mm
X
9,5 mm
Ø A
35 mm
B
74-87 mm
C
74-87 mm
Ø F
6 mm
E
8 mm

⇓View and Download our Instruction Manual⇓ 

Steps:

  1. Drill 2 boreholes according to dimensions
  2. Cut groove for threaded rod.
  3. Insert threaded rod into gear drive and attach to U shaped bracket
  4. Carry out installation by tightening gear drive using a 5 mm Allen key or hex bit

Reviews

There are no reviews yet.

Be the first to review “ZIPBOLT™ – Countertop and Joint Connector”

Your email address will not be published.

You may also like…