The ZIPBOLT™️ connector is a practical and innovative solution as a countertop, worktop, frame, and home furniture connector. The ZIPBOLT™️ completely eliminates the difficult and time-consuming use of a screwdriver needed for conventional connectors.
ZIPBOLT™ – Countertop and Joint Connector
$26.00 – $81.25
- ZIPBOLT™ 100 mini
- ZIPBOLT™ 85
- ZIPBOLT™ 120
- ZIPBOLT™ 170
- Reviews (0)
The ZIPBOLT™️ connector is a practical and innovative solution as a countertop, worktop, and frame connector. The ZIPBOLT™️ completely eliminates the difficult and time-consuming use of a screwdriver needed for conventional connectors and fasteners. ZIPBOLT™️ requires no additional tightening while the parts are connected. Tensioning tools often cause damage and a considerable amount of extra work – this is not necessary when using the ZIPBOLT™️. The fastener connects and holds the components in position; easy disassembly is possible at any time.
The connector consists of a threaded rod, which has a metric fine thread and ensures an optimal force transmission – combined with a force-transmitting gear drive. The mounting of the connector is very fast; it is easy to install with a cordless drill or even a hand-held screwdriver. With these tools, the processor can quickly tighten the components together. One-hand mounting is also possible. Countertops and frames from 5/8″ (16 mm) to 1-1/2″ (38 mm) board thickness can be connected in just a few seconds. The different variations ZIPBOLT™️ 85, 100 Mini, 120, 170 and 90 KD are specifically tailored for different dimensions and requirements in the components.
ZIPBOLT™️ 100 MINI – Components can be tightened by simply using a #4 mm or 5/32″ hex key.
ZIPBOLT™️ 85, 120, 170 – Components can be tightened simply by using a #5 mm or 3/16″ hex key.
Features and Benefits:
- Fast and simple assembly
- Items can be flat packed, shipped, and assembled on site
- Easy to install with a cordless drill or hand-held screwdriver
- Reduces labor and equipment cost
- Can be disassembled and reassembled at any time
- For board thickness from 5/8″ (16 mm) to 1-1/2″ (38 mm)
- Used with all wood and board materials
- Connector for RTA furniture.
- Countertops and frames
- Case Goods
- Beds frames
- Tables and chairs
- Case Goods
- Office and home furniture