///QUATRO 65 – Hidden Deck, Panel and Board connector

QUATRO 65 – Hidden Deck, Panel and Board connector

Call for Price

SKU: N/A Categories: ,

Description

Recommended for spacing no smaller than 7 mm.

  • Concealed from the first board to the last.
  • Constructive wood protection against moisture.
  • Optimal rear ventilation through spacing between the boards and the joists.
  • Also suitable for wood board facades for which rear ventilation is needed.
  • Easy installation with mounting templates.
  • Allows shrinking and swelling of wood.
  • UV and weather-resistant fiberglass reinforced plastic.

Tips:

  • Even the best connecting system cannot compensate the poor quality of some timber. Please ensure that the timber is dry and in particular avoid timber from the core and spiral-grained boards.
  • Maximum recommended length of the boards is 3 meters (9.8 ft.).
  • Pre-drill, particularly with hardwoods, such as oak.
  • Follow the installation instructions of your timber supplier.

Additional information

QUATRO

QUATRO 65/25, QUATRO 65/30

Application

More applications

Details

  • Concealed from the first board to the last
  • Constructive wood protection against moisture
  • Allows expansion and contraction of wood boards
  • Optimal rear ventilation through spacing
  • Can be used for timber facades and formwork, for which rear ventilation has been implemented
  • Easy installation with mounting templates
  • UV and weather-resistant fiberglass reinforced plastic.

Tips:

  • Even the best connecting system cannot offset poor quality of some timber. Please ensure that the timber is dry; particularly, avoid timber from the core and spiral-grained boards.
  • Recommended length of the boards: maximum 3 m (9.8 ft.).
  • Recommended for spacing no smaller than 7 mm between the boards and the joists
  • You may pre-drill, particularly with hardwoods, such as oak.
  • Follow the installation instructions of your timber supplier.
Material
Kunststoff – PA6, glasfaserverstärkt, schwarz
Beschichtung
keine
Verbindertyp
Terrassendielen- und Paneeleverbinder
Befestigung
SK-Edelstahlschraube A2 5×25 mm mit Bohrspitze für Dielenstärken 24-26 mm
SK-Edelstahlschraube A2 5×30 mm mit Bohrspitze für Dielenstärke ab 27 mm
Vorteile
Lässt Quell- und Schwindverhalten zu, keine sichtbaren Schrauben von der ersten bis zur letzten Diele, konstruktiver Holzschutz gegen Nässe für das Lagerholz
Verarbeitung
Vorbohren mit Montageschablone (speziell bei Harthölzern zu empfehlen), Verschrauben und Zusammenstecken, Schraubenlängen an Materialstärke anpassen
Materialwahl
Die Verlegeempfehlungen des Holzlieferanten beachten
Anwendung
Für Terrassenböden, Balkondielen, Wandpaneele und Decken

Requirements for decks

For joist spacing of 500 mm

Board thickness 150 mm
Approx. 17 pairs connectors / m²

Board thickness100 mm
Approx. 25 pairs connectors / m²

Board thickness 150 mm
6 m² / packaging unit

Board thickness 100 mm
4 m² / packaging unit

Construction manual