Mod-eez®️ System Sets

$36.60$368.40

Mod-eez®️ System is specifically designed with RTA furniture, case goods and cabinetry in mind. Mod-eez®️ Clips are made of spring steel for extreme durability, working for both 5/8″ and 3/4″ + material.

Mounting screws and Shoulder Head Screws are included and can be attached in all wood materials.

Description

Mod-eez®️ System is specifically designed with RTA furniture, case goods and cabinetry in mind. This innovative system was developed to join panels securely together in a fast and simple method with no visibility of the connector. The Mod-eez®️ Fastening System meets the objective by utilizing a spring steel declining ramp “clip” and a large collared Shoulder Screw at the two mating members. Spring steel makes the joint strong, yet flexible, while the collar on the Shoulder Screw adds tremendous resistance to torsional pull-out. Assembly occurs by simply sliding the Shoulder Screw head down the clips ramp. With the clip located in its pocket, and the system assembled, all fasteners disappear.

Mod-eez®️ Sets include mounting screws and shoulder head screw for assembly. With each set, you can choose between a Pass-thru Clip (shoulder head passes through the clip) or a Non-locking Clip (easy to disassemble). Mod-eez®️ Sets comes in one width, working with both 5/8″ and 3/4″ + material. Mod-eez®️ Clips are also available in Single Clips, Double Clips, and Anti-Rotation Clips.

Features and Benefits:
  • Fast assembly
    • Efficient and very good to use in production line manufacturing.
    • Components are simply hooked together in seconds
    • Reduces labor and equipment cost
    • Efficient: High degree of pre-manufacturing.
    • Components can be transported and simply assembled on site.
  • Non-visible connector
    • Appeals to the architect and customer
    • Concealed
  • Self-tightening
    • The pass-thru, non-locking and semi-locking clips can be disassembled and reassembled
  • Versatile
    • For materials from 16 mm thickness and up.
    • Used with all solid and wood-based materials and plastic as well as steel and aluminum.
    • 4 types of clips: Pass-thru, non-locking, semi-locking, and locking.
  • Durable and Strong
    • Spring steel sturdy design
    • Longer PH-screws (approx. 5 x 60), can significantly increase the strength of the connector.
Tips:
  • Perfect for industrial manufacturing with CNC
  • Welding Mod-eez®️ Clips to steel (i.e. approximately 16 ga.) can be accomplished by wire welding.
  • Pockets to receive connectors are normally routed into the edge of a panel but can be routed into the face when design so requires.
  • To prevent engaged members from rotating (without anti-rotation clips) attach the Shoulder Screw in the pocket and the clip on the surface.
  • For handheld routers, use our Mod-eez®️ Drilling and Depth Jig for a perfect installation every time.
  • Used with all wood and board materials
Applications:
  • Case Goods
  • Cabinets
  • Chairs
  • Furniture
  • Interior design
  • Shopfitting

Product Pictures

Applications

Videos

Installation

⇓View and Download Instruction Manual⇓

Steps:

  1. Route pocket in Mod-eez®️ Clip according to chart below.
  2. Use the Mod-eez®️ Drilling and Depth Jig to pre-drill (5/32″ or 4 mm) holes 32 mm on center. This Jig will also ensure that the pocket is drilled to the perfect depth for all Mod-eez®️ single clip, double clip, and anti-rotation connectors.
  3. Mount clip with PH-Screws Ø = 4,5 mm (length as required)
  4. Pre-drill hole for Shoulder Screw and install
  5. Assemble workpiece with a rubber mallet

Tips:

  • Welding Mod-eez®️ Clips to steel (i.e. approximately 16 ga.) can be accomplished by wire welding.
  • Pockets to receive connectors are normally routed into the edge of a panel but can be routed into the face when design so requires.
  • To prevent engaged members from rotating (without anti-rotation clips) attach the shoulder screw in the pocket and the clip on the surface.
Mod-eez®️ (for 5/8″ stock)
4031, 4032, 4034, 4035
Routing depth T
11 mm / 0.438″
Routing length L
≥ 42 mm / 1.674″
Routing width B
11 mm / 0.430″ / 7/16″
Center distance Z
11 mm / 0.438″
Panel thickness from
16 mm / 5/8″
Hole-line A
32 mm / 1-1/4″
Mod-eez®️ (for 3/4″ stock)
5030, 5032, 5032A (available upon request only)
Routing depth T
11 mm / 0.438″
Routing length L
≥ 42 mm / 1.674″ / 1-11/16″
Routing width B
13,5 mm / 0.525″ / 1/2″
Center distance Z
11 mm / 0.438″
Panel thickness from
19 mm / 3/4″
Hole-line A
32 mm / 1-1/4″

Reviews

There are no reviews yet.

Be the first to review “Mod-eez®️ System Sets”

Your email address will not be published.

You may also like…