FAST Biscuit Connector – Sample Pack

Home/FAST Biscuit Connector – Sample Pack

FAST Biscuit Connector – Sample Pack

$10.00

The FAST Biscuit Connector Sample Pack contains 10 pairs. FAST is a #20 self-tightening, non-visible plastic snap-in connector and can be used in all wood materials. The two connector pieces are simply knocked into the biscuit cut with a hammer.

→ Order larger quantity

Description

FAST Biscuit Connector – Sample Pack

The FAST biscuit is a #20 self-tightening, non-visible plastic snap-in connector and can be used in all wood materials. The two connector pieces are simply knocked into the biscuit cut with a hammer. The patented cutting edges hold the connector in the slot with no glue required. Simply snap-in the male into the female part to carry out the assembly. If needed, it can be reinforced by adding drops of KNAPP®-Adhesive PU+ (Z011/1) when installing the connector pieces. Make sure that you insert the connector parts mirrored into the components. This connection is immediately load-bearing, putting NO halt on the manufacturing process. The FAST connector is suitable for all types of snap-in connections, especially where design or space conditions do not allow the usual sliding connection, or for very simple self-assembly by the end-user.  Add KNAPP®-Adhesive PU+ (Z011/1) to the joint before the final assembly for a permanent joint.

Features and Benefits:
  • Fast assembly
    • Components simply snap-in and join together in a second.
    • Reduces labor and equipment cost
  • Non-visible connector
    • Appeals to the architect and customer
  • Self-tightening
    • no need to clamp the workpiece during assembly
    • snaps straight in and is used where design or space conditions do not allow the usual sliding connection
  • Gluing aid
    • Very popular to use as a gluing aid
Tips:
  • Works great for RTA furniture.
  • Used with all wood and board materials
  • Recommended glue for a permanent joint → KNAPP®-Adhesive PU+ (Z011/1) or to install with the connector for reinforcement
Applications:
  • Case Goods
  • Architectural Millwork
  • Shop-fitting
  • Furniture
  • Gluing aid
  • Moldings and trim
  • Face frames
  • False fronts

 

Material

Plastic – PA6, grey

Coating

none

Connector type

Clip-in connector

Mounting

Knock-in following the radius of the cutting edges, permanent gluing optional using KNAPP-Adhesive PU+

Advantages

Concealed, self-tightening, demountable connector

Installation

Cutting a slot with a biscuit joiner (#20 slot) and adjust the depth of the slot to 12.5 mm by using the micro-adjustment screw. Insert each of the different connector halves into the pre-cut slots.

Suitable materials

All softwoods and board materials without laminated surfaces

Application

Furniture, architectural millwork, face frames, shopfitting, blinds, coverings, removable panels

Applications