CHAMP – Biscuit Connector

$42.63$155.00

The tried and tested CHAMP biscuit is a #20 self-tightening, non-visible plastic slide-in connector and universally used for all types of materials for furniture, case goods, and architectural millwork. The two halves of the plastic connector are simply glued into the slot. Through the holes on the bottom part of the connector, the KNAPP Adhesive PU+ (Z011/1) can bond firmly to the material. After the curing, simply slide the parts together and tighten up the joint.

→ Order a Sample Pack

Description

The tried and tested CHAMP biscuit is a #20 self-tightening, non-visible plastic slide-in connector and universally used for all types of materials for furniture, case goods, and architectural millwork. The two halves of the plastic connector are simply glued into the slot. Through the holes on the bottom part of the connector, the KNAPP Adhesive PU+ (Z011/1) can bond firmly to the material. After the curing, simply insert and then slide the parts together and tighten up the joint. A permanent connection can be made by gluing the joint. The CHAMP is utilized for standard cabinets as well as complicated parts such as miter joints where standard clamping aids cannot be used. Since the CHAMP connector is self-tightening, the pressure is applied directly within the joint and thus you will always achieve a tight and clean-glued joint.

Features and Benefits:
  • Fast assembly
    • Components simply slide together in seconds.
    • Reduces labor and equipment cost
  • Non-visible connector
    • Appeals to the architect and customer
  • Self-tightening
    • no need to clamp the workpiece during assembly
    • prevents forming of gaps in the joint over time
  • Disassemble
    • Can be assembled and disassembled
  • Gluing aid
    • Very popular to use as a gluing aid, especially useful for miter joints.
Tips:
  • Used for knock-down furniture
  • Used with all wood and board materials
  • Recommended glue to install the connector biscuit and for the joint → KNAPP®-Adhesive PU+ (Z011/1)
Applications:
  • Case Goods
  • Architectural Millwork
  • Shopfitting
  • Furniture
  • Gluing aid

Applications

Videos

Installation

⇓View and Download Instruction Manual⇓

Steps:

  1. Make a #20 biscuit slot
  2. Add approx. 1/2″ bead of KNAPP®-Adhesive PU+ (Z011/1) in the middle and deepest point of the slot.
  3. Press the connector halves into the groove so that they mirror each other, using the fitting jig.
  4. Make sure that the connectors at the outer ends are flush with the surface of the component.
  5. After the glue is hardened enough, the parts can be joined together. To assemble the parts, first, insert and then slide them into each other.
  6. If desired, for final assembly, glue the joint before connecting the components.

Tips:

  • Note: do not use too much adhesive
  • Used for RTA furniture.
  • The fitting jig ensures an optimum installation depth of the connector in the groove, regardless of how porous the panel material is.

Reviews

There are no reviews yet.

Be the first to review “CHAMP – Biscuit Connector”

Your email address will not be published.

You may also like…